| |
| SIMPLE
INSTRUCTIONS |
 |
| Remote Unlocking |
You can find the unlock code for your phone under Check
Order Status, by filling in the Tracking Number and IMEI/ESN
number. Remote Unlock codes are usually posted on the website
after 24 hours of Order confirmation and receipt of payment.
In rare cases of technincal failures and on weekends, codes
may be posted after 48 hours. Please read the instructions
carefully, on how to enter them in your phone, and get it
unlocked.
NOTE: In case the given code does not
work, please do not re-enter it. Doing so, may cause your
phone to be hard locked. Contact Us and we shall give you
a new code. |
Alcatel
1. Remove the SIM card from your phone.
2. Turn ON the phone now. Wait till you see "Insert
SIM" message.
3. Hold down the * key and at the same time enter "787292"
4. Then enter the code given to you. Please ensure
that you have entered the correct code.
5. Your phone should be unlocked. |
LG
510, 510W, 520
1. Turn ON the phone with the working SIM Card (of your current
Network Operator).
2. Press 2945#*5101#
3. Press Menu 555
4. Select Network.
5. Choose OFF.
Thereafter, enter the code given to you. Please ensure
that you have entered the correct code.
5. Your phone should be unlocked.
B1200
1. Turn ON the phone with the working SIM Card (of your current
Network Operator).
2. Press 1945#*5101#
3. Select Network.
4. Choose OFF.
Thereafter, enter the code given to you. Please ensure
that you have entered the correct code.
5. Your phone should be unlocked.
7010,7020
1. Turn ON the phone with the working SIM Card (of your current
Network Operator).
2. Press 2945#*70001#
3. Select Setup -> Menu.
4. Select Security ->SIM Lock.
5. Choose OFF.
Thereafter, enter the code given to you. Please ensure
that you have entered the correct code.
5. Your phone should be unlocked. |
Motorola
A920 / A925
1. Switch on your phone with a SIM Card from another Operator
/ Network (for example if your
phone accept only T-Mobile, you should use a sim card from
Vodafone, Orange, AT&T etc.).
2. Enter **057*
3. You will be asked for unlock code (Personalization Code).
4. Enter the unlock code provided by us.
5. Your phone should be unlocked.
Other Models
1. Switch on your phone with the not allowed / locked SIM
Card!
2. You should see "Enter Special Code"
or "Enter Subsidy Code" message
on the display.
3 . Enter the unlock code provided by us.
5. Your phone should be unlocked.
Note:
On V6x, V70, T280, C3xx, T720 models, if you see "Contact
Service Provider" message on the display after
putting a "not allowed SIM Card",
that means you have already entered a wrong code!
To solve this this problem - You have to wait 30 min till
"Enter Special Code" message appears
again! |
Nokia ASIC7, Symbian, DCT4, 3650, N-Gage
1. Remove the SIM card from your phone.
2. Turn ON the phone now. Wait till you see "Insert
SIM" message.
Thereafter, enter the code given to you. Please
ensure that you have entered the correct code.
1. # once
2. * three times for "p"
3. * four times for "w"
4. * twice for "+"
5. Press numbers: XXXXXXXXXXXXXXXX, where
X is the number given in the Unlock Code.
6. Press * twice for "+"
7. Enter the number which appears as the last digit in the
unlock code after "+"
8. Press # once to finish the code.
9. Your phone should be unlocked.
|
Nokia DCT3
NOTE: There may be cases where you may be given 2
unlock codes. Please enter them one after the other (in the
order they will be given).
1. Remove the SIM card from your phone.
2. Turn ON the phone now. Wait till you see "Insert
SIM" message.
Thereafter, enter the code given to you. Please ensure
that you have entered the correct code(s).
1. # once
2. * three times for "p"
3. * four times for "w"
4. * twice for "+"
5. Press numbers: XXXXXXXXXX, where X
is the number given in the Unlock Code.
6. Press * twice for "+"
7. Enter the number which appears as the last digit in the
unlock code after "+"
8. Press # once to finish the code.
9. Your phone should be unlocked. |
Panasonic
NOTE: There
may be cases where you may be given 2 unlock codes. Please
enter them one after the other (in the order they will be
given).
1. Remove the SIM card from your phone.
2. Turn ON the phone now. Wait till you see "Insert
SIM" message.
3. Enter the code starting with **00032* first.
4. Thereafter, enter the second code (if any) starting with
**00012*. Please ensure that you have entered the
correct code(s).
5. Your phone
should be unlocked. |
| |
| Unlocking With
Data Cable |
You shall be given a software download link and Login in
the Invoice. Instructions for unlocking can usually be found
in the same link.
However, there may be certain cases where the unlock instructions
are sent in the Invoice itself.
Note: Software(s)
must be used with the Data Cable(s) sent by GSMLOCKER.COM
or else the unlocking may not be successful. Use the Login
cautiously as they can be used only once. Extra Logins are
chargeable.
Refunds in such cases, are not applicable. |
| |
Search |
FAQ
| Contact
